MODLITE & DWARF CAR CHASSIS PARTS









Back to HOME page.


  • nXs Chassis

  • New Pro Chassis.
  • Pro Chassis Parts.
  • About Us.
  • Brake System Parts.
  • Chassis Parts.
  • Cooling & Oil System.
  • Contact Us.
  • DMI Rearend Parts.
  • Drivetrain Parts.
  • Dzus, Spacers, fasteners.
  • Eletrical System.
  • Engine Parts.
  • Filters, Air, Oil, Fuel.
  • Fittings and Hoses.
  • Front End Parts.
  • Fuel System Parts.
  • Guarantees.
  • Harness' GSXR & ZX10.
  • Harness Trim Services.
  • Heims & Pinch Clamps.
  • Motors, GSXR, ZX10.
  • Payment Info.
  • Photos Modlite & Dwarfs.
  • Racing Links.
  • Returning Info.
  • Rims, Lugs, Spacers, Tires.
  • Rods, Swedge, Radius.
  • Safety, Belts, Seats, Suits.
  • Steering System Parts.
  • Suspension Parts.
  • Toyota Rearend Parts
  • Winters Q.C. Parts
  • Used GSXR Bike Parts
  • Used Modlite, Dwarf Parts.
  • Used Modlite, Dwarf 4 sale.


  • NXS Aluminum 3rd link mount set.
    Clamp on axle mount and bolt on center section mount for Winters Q.C. rearends with 2.5 inch tube. Comes with grade 8 bolt to install into hole you will drill into tube to stop axle mount from twisting.
    Item# NXS3LMS..$99



    NXS Winters 3rd link axle mount.
    3rd link clamp on axle mount with grade 8 bolt to install into hole you will drill into tube to stop axle mount from twisting. Fits 2.5 Inch tubing. Use 2 of these on Toyota rearends with 2.5 inch tube.
    Item# NXS3LAM..$69



    NXS Winters 3rd link center mount.
    3rd link bolt on bracket to Winters Q.C. rearends. Mount one on each side of center section for 3rd link mounting through tunnel. Item# NXS3LCM..$38

    NXS Panhard adjuster set.
    Adjustable from deck lid. Just like nascar! Super quick to adjust panhard fits perfect in 2010 and up Pro & Lightning Chassis. May fit other.
    Item# NXSPHAS. $135



    NXS left trailing arm adjuster kit.
    Adjust your left trailing arm quickly with 3/8 inch drive rachet in seconds. Heavy duty clamps with grade 8 threaded rod requires little effort to adjust. Comes complete as shown. Fits 2010 and newer Pro and Lightning chassis and may fit others.
    Item# NXSTAAS. $105



    NXS Adjustable Torque link kit..$
    Same as above. But includes a Quick Car Bisciut Torque link.


    DMI 3rd link torque link mount..$
    Mount replaces stock DMI mounts. Used so that an adjustable biscuit or spring torque link can be installed. Pinch clamp style mounting. For extra security you can also bolt or tack weld to axle tube.


    DMI 3rd link torque link mount..$
    Mount replaces stock DMI mounts. Used so that an adjustable biscuit or spring torque link can be installed. Bolts to DMI left side center section.


    Winters 3rd link torque link mount..$
    Mounts to axle tube with pinch clamp style mounting. Used so that an adjustable biscuit or spring torque link system can be installed. For extra security you can bolt or tack weld to axle tube.


    Winters 3rd link torque link mount..$
    Mounts to Winters center section. Used so that an adjustable biscuit or spring torque linksystem can be installed. Bolts to Winters left or right side center section.


    NXS Aluminum 3rd link mounting set..$
    Mounts to Winters left and right center section to attach a 3rd link to chassis.


    NXS DMI Complete Adjustable 3rd link kit..$
    Kit will include everything needed to install an adjustable 3rd link that will allow for a torque link or solid bar installation. You will need to have two brackets welded to the chassis behind drivers set. And purchase a torque or solid bar. Includes left axle mount and right center section mount with nuts and bolts. Also Two #8 hardened threaded adjuster screws with nuts and rachet end welded on for quick easy adjusting. Two solid 3/4 inch slider rods with 4 end screws and nuts. And two aluminum heavy duty adjusters. All of this will replace the stock mounts on the 2013 and up Pro chassis cars, just in case you prefer a 3rd link biscuit or spring torque bar.


    NXS Winters Complete Adjustable 3rd link kit..$
    Kit will include everything needed to install an adjustable 3rd link that will allow for a torque link or solid bar installation. You will need to have two brackets welded to the chassis behind drivers set. And purchase a torque or solid bar. Includes left axle mount and right center section mount with nuts and bolts. Also Two #8 hardened threaded adjuster screws with nuts and rachet end welded on for quick easy adjusting. Two solid 3/4 inch slider rods with 4 end screws and nuts. And two aluminum heavy duty adjusters. Will fit most cars with Winters center mounted 3rd link systems.

    blank

    NXS 3rd link rod..$
    Rod is 3/4" with hole drilled at each end and comes with 2 end screws and lock nuts. Is a replacemnet part.


    NXS 3rd link adjuster screw..$
    Adjuster screw is #8 hardened screw with nut and welded on 3/8" drive fitting for quick easy adjustment. Is a replacement part.


    NXS Aluminum 3rd link blocks..$
    Heavy duty aluminum adjuster blocks Accepts torque or solid rod with heims. Has threaded and drilled holes. Is a replacement part.


    Quick Car Biscuit Torque link..$
    Shown example of installed part. Torque link only. Does not include other parts shown.


    Winters 3rd link


    NXS Aluminum 3rd link mounting